Product ID:AMBERLITE IRC 718 RESIN, 74429
MSDS Date:01/31/1994
FSC:6810
NIIN:00N078873
MSDS Number: CGYQB

ROHM AND HAAS CO

100 INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19106-2399
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

NON-HAZARDOUS INGREDIENTS; (MODIFIED DVB/ STY/

Fraction By Weight: 30-34%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: AC0110000

Fraction By Weight: 66-70%

OSHA PEL N/K

ACGIH TLV: N/K

GOVERNMENTAL INDUST HYGIENISTS FOR INFO ON DESIGN,

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE CONTACT: MATERIAL CAN CAUSE
IRRITATION. NO TOXICITY DATA ARE AVAILABLE FOR THIS MATERIAL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD . EYE:FLUSH WITH LARGE AMOUNT OF WATER
FOR AT LEAST 15 MINUTES. CONSULT A PHYSICIAN IF IRRITATION
PERSISTS.

Extinguishing Media:CARBON DIOXIDE - DRY CHEMICAL - WATER SPRAY.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:FLOOR MAY BE SLIPPERY; USE CARE TO AVOID
FALLING. TRANSFER SPILLED MATL TO SUITABLE CNTNRS FOR
RECOVERY/DISPOSAL. WEAR GLOVES MADE OF COTTON/CANVAS. ADDNL
PERSONAL PROT EQUIP SHOULD INCL SFTY GLASSES (ANSI Z87.1 OR APPRVD
EQUIVALENT).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THE MIN REC STOR TEMP FOR MATL IS
OC/32F. MAX REC STOR TEMP IS 60C/140F. KEEP FROM FREEZING; MATL
STABILITY MAY BE AFFECTED.
Other Precautions:THE MAX REC OPERATING TEMP FOR MATL IS 150C/300F.
PROPERLY DESIGNED EQUIP IS VITAL IF THESE RESINS ARE TO BE USED IN
CONJUNCTION W/STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID TO PVNT
RAPID BUILD-UP OF PRESS & POSS EXPLO. CONSULT (SUPDAT)

Respiratory Protection:NIOSH APPRVD RESP APPROP FOR EXPOS OF CONCERN .
A RESP PROT PROGRAM MEETING OSHA 1910.134 & ANSI Z88.2 REQUIREMENTS
MUST BE FOLLOWED WHENEVER WORKPLACE CNDTNS WARRANT RESP'S USE. NONE
REQD UNDER NORMAL OPERATING CONDITIONS.
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLIC OF
THIS MATL. REFER TO CURRENT EDITION OF INDUST VENT:(SUPDAT)
Protective Gloves:WEAR COTTON/CANVAS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 8-9 AQUEOUS SLURRY. % VOLAT:66-70% WATER. OTHER PREC:SOURCE
KNOWLEDGEABLE IN HNDLG OF THESE MATLS BEFORE PROCEEDING. DO NOT
PACK COLUMN W/DRY ION EXCHANGE RESINS. DRY BEADS EXPAND WHEN
WETTED; THI S EXPANSION CAN CAUSE GLASS COLUMNS TO SHATTER. VENT:A
MANUAL OF REC PRACTICE PUBLISHED BY AMERICAN CONFERENCE OF(ING 3)

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17 @ 20C
Vapor Density:<1
Spec Gravity:1.05 (WATER =1)
pH:SUPDAT
Evaporation Rate & Reference:<1 (BUAC =1)
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:TAN BEADS.
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED NITRIC
ACID.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD THE
FOLLOWING:MONOMER VAPORS.

Waste Disposal Methods:UNUSED RESIN MAY BE INCIN/LANDFILLED IN
FACILITIES MEETING LOCAL, STATE, & FEDERAL REGULATIONS. FOR CONTAMD
RESIN, THE USER MUST DETERMINE THE HAZARD & USE AN APPROPRIATE
DISPOSAL METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.